2 To 8 Degree Ss Casing Cold Room Evaporator Drinks Medicine
1. Cold Room Cold storage Evaporator Features
1) Coli Block
a) Φ16mm Copper tube or stainless steel tube.
b) High efficiency sine wave fin.
c) Fin material:8011, AlMg3, 304(316L), Coated.
d) Fin Pitch: 4.5mm, 6mm,9mm.
e) Other fin pitch can be customized by user.
2) Optimized Design
a) Structures and covers of Unit Cooler are designed by our 3D
b) Our advanced coil software can simulate your running heating
c) We can provide CAD drawings and reliable data of your customized
3) Optimized Structure& Casing
a) Using maintenance door, checking and maintenance will be easier.
b) Support foots are considered which can provide convenience of
installing and carring.
c) Normal casing material is galvanized steel ,power coated white
d) Other option: Aluminum or stainless steel
4) Guarantee of Safe Running
a) Stainless steel Pipe running pressure to 5.0Mpa, Blasting
pressure to 40Mpa.
b) Nitrogen pressure 5.0Mpa which keeping 24 hours for leaking
5) Fan System
a) Extended air throw streamer, air throw can reach to 70m
b) Motor protection class IP54, Insulation grade F.
c) Duct axial fan blades are made of casting aluminum
d) Motor application temperature: -45℃~50℃.
e) Lower noise fan is possible for special application conditions.
f) Motor power will be changed with the change of air temperature
6) Rapid Defrosting System
a) Electrical defrosting- stainless steel heating pipe, installed
in fan, coil and water pan
b) Water defrosting- water tray spraying
c) Hot gas defrosting- hot gas pipe set in tray, energy saving and
high efficient, help oil return to compressor
d) Combine different defrosting ways together
2. Cold Room Cold storage Evaporator introduction
1) EST series Air Cooler/Evaporator is a kind of cooling equipments
which used with refrigerant units application for different cold
rooms. It is clasified three category including ESTJS, ESTKS, ESTXS
by different cold room temperature. JS series applied for
0°Cpreservation cold room; KS series applied for about -18°C cold
storage; XS series applied for -25°C frozen storage.
2) Unit cabinet of steel plate with plastic spray, corrosion proof,
and pleasant looking;
3) Mechanically expanded pipes with AL fins with good heat transfer
4) Inside are evenly arranged with defrosting heaters;
5) The bottom has double water receiver, effective for
6) Long distance air throw is optional.
7) External rotor fan for low temperature, with low noise, high
efficiency, and reliability.
1) The cooler can be fixed on the ceiling with 4, 8, or 10 long
2) The space between the unit and wall must be ≥400mm (see the
diagram). It is necessary for air circulation and maintenance.
3) The unit must be level after being fixed.
4) A slope on the drainage pipe from the cooler to the outside is
needed for the condensed Water goes to outside smoothly. A U shape
is needed at the outside on the drainage pipe to keep the hot air
from going inside. (See the diagram)
5) The drainage pipe inside the room need be heat insulated. The
heating line is needed to prevent the condensed water from freezing
in case the cold room temperature is below 0℃.
6) The temperature sensor of the solenoid valve should be fixed on
the level parts of suction pipe, keep touch well with the pipe
surface. The suction pipe should be heat insulated to prevent the
sensor from interfered by the room temperature.
7) The space outside the air outlet of the cooler must not be no
obstacles, to prevent the air blowing be interfered.
4. Detailed Parameter- Cold Room Cold storage Evaporator
|ESTJS Series Air Cooler Technical Parameter(Fin
|Model||Capacity KW||Air Flow||Air throw||Fan Dia.||Fan Qty||Fan Power|
Q: What kind of Technical support Eurostars can provide?
1. Set up customers file, and arrange professional sale engineers
to introduce company products and services to customers in detail.
2. If customers are interested in our products, we will send
professional technicians to survey the installation environment.
3. Make the solution according to different customers'
1. Machine installs and test by qualification engineers.
2. Ensure all the products we provided are qualified and new. The
working life of the main engine is 15 years.
3. Construct and install the heat pump according to national
relevant policies strictly, and ensure high quality delivery on
4. Test and debug the equipments strictly to ensure the safety and
5. During the delivery, provide comprehensive and professional
technical training on instructions and maintenance to customers.
1. We promise to offer free consulting call in 7×24 hours mode to
solve the problems found in practice.
2. Products guarantee is 18~24 months from ex-factory date. Within
18months,if any components of your products damaged because of
quality, we supply new replacement for free.
3. After the expiration of the quality assurance, we will continue
to provide lifelong maintenance services, with just charging some